Energy efficient heating

When we talk of efficient energy, space heaters are amazing for providing additional heat when the primary source of heat isn’t effective or when it is too costly to install or use a central heating system.

As a matter of fact, a space heater happens to be less costly to operate if it is being used to heat just a small room, or raise the temperature of a room used by an occupant who is sensitive to cold. Additionally, energy loss through combustion or ducts doesn’t occur with space heaters; hence, they are known to be about 100% efficient. A great amount of the heat generated by a space heater will radiate into the desired room.

Propane or kerosene heating units are best for industrial places like warehouses and workspaces, because these types use little/no electricity. Nevertheless, they can’t be used in places without enough ventilation, they also carry some hazards.

Electric space heating units are great for home usage. Majority of electric space heating units warm the air in a room conventionally. When they are used as a supplement to existing central heating units/system, portable electric space heating devices are affordable. However, some electric heating devices depend on radiant heating, i.e. they emit infrared radiated heat just like the how sun warms the surface of the earth. Just the objects around the heating system get warmed, due to this, using a heating system can be really energy-efficient, because infrared heating systems transfer warm air immediately to occupants only but not the entire room. They also heat the room up faster. Finally, you should consider using a radiator heater that has been filled with oil. These type of heaters, just as electric space heating devices, are amazing if your central heating unit isn’t sufficient. They are silent, energy efficient because these systems can maintain the desired temperature of the room automatically, and they safe.

Hence, with the aforementioned choices of heating units available to homeowners, you will still be able to save some money on your heating bill while you feel comfortable in your living space. If you want more money saving ideas, follow the following tips:

  1. Go for a heating system that is controlled with a thermostat or that has a timer. These types avoid waste of energy from an overheated room. You should as well consider hiring a heating contractor to help with the installation of the thermostat if you don’t know how to go about such electrical connections.
  2. Get a heating system of the appropriate size for the room you would want to fill with warmer air. Don’t opt for an oversized heating system.
  3. Avoid leaving the space heater on a high setting, and ensure you turn it off whenever you aren’t home. They can exhaust a large amount of energy if continuously left on.
  4. close windows and doors so as to reduce loss of heat and for effective heating especially. If you switch your heating system on and off every time, or you adjust the thermostat, it can also increase amount of energy used.


You have made a good decision to improve your home. This decision would help you enjoy your home better, make your home more livable, make you free to always have the presence of guests in your home because you want to show them the beauty you have created in your home, and above all your home is a place you are proud of. When people begin to appreciate the improvement you have made in your home, they can even consult you to help them plan their own home improvement project, from which you could even make a career. However, improving a home is more than just a Do-It-Yourself project. Over the years there have been created informal rules on how to go about a home improvement project. To successfully embark on your home improvement project, you need to take note of the following essentials which have been termed as How to Go about Your Home Improvement Project.


Below here are highlights of the things to take note of before embarking on that home improvement project of yours.

  • Plan In Advance: Planning is the first step to success in any project. Just as the idiom goes, failing to plan is planning to fail. Before you start making announcement about your home improvement project to potential helpers; other family members, friends, and neighbors, you must prepare the cost of what it would take you to succeed in the project including, the timeline, the design you would follow, among other things you have to plan for. Ask licensed contractors about proposed schedules. If it’s DIY (do it yourself), create your own schedule so a project doesn’t drag on too long.


  • Schedule Everything: This is also like planning, but more specifically planning the timing of the project from finish to start, it involves determining the estimated time of project completion and making allowances for delay from third party factors. Scheduling may include demolition time, potential licensed contractor delays, appliance shipping time, and other anticipated tasks.


  • Hire A Professional When Needed: Many tasks can be DIY, but licensed contractors are necessary for some jobs that require specialized experience. Some home improvement projects could require certain technical activities that can be best handled by experts. For example a major plumbing work would not be advisable to be self-done.




  • Know The Project Scope: As much as this may relate to planning, it is important to emphasize it separately because this can make the home improvement project a regret if not noted keenly. In a recent study, the biggest DIY regrets came from expanding on and renovating rooms without understanding the true extent of the task.


  • Splurge When Necessary: Certain expenses have to be budgeted for even though they might not appear to be needed. They can give your home a better look and glow. Budget for quality item; Increased lighting, better windows, new fixtures in kitchens and bathrooms, good paint colors, kitchen cabinets.


  • Consider A Home Equity Line Of Credit: It’s a good alternative to help fund a larger home improvement project or to cover unexpected costs without having to dip into your savings, typically offered with lower and tax deductible interest rates.


Benefits and Drawbacks of a Geothermal HVAC System

Are you constructing a new home or just making adjustments to an already existing one?

Then, choosing a new cooling and heating system and is something you would want to consider carefully. A Geothermal HVAC system is one of the options you might want to invest in. A Geothermal HVAC system is such that harnesses the fairly stable temperatures of the earth to make your home comfortable. In more clear terms, heat energy is transferred between the ground and your home by utilising the earth as a heat source during winter, and a heat sink during summer. A special type of pump is used to achieve this, and oftentimes, solar heating is paired with Geothermal systems to improve overall system efficiency.

Is Geothermal HVAC system right for you?

It then becomes necessary that you familiarise yourself with the benefits and drawbacks of this form of cooling or heating your home.


  1. Safe to use

Unlike some HVAC systems which burs gas or oil to generate heat, Geothermal HVAC systems do not use combustion. This infers that there is a zero (0) percent discharge of a deadly gas such as carbon monoxide.

  1. Eco-friendly

Geothermal energy is a clean renewable resource for cooling and air conditioning and heating and it is insignificant as a pollution source. Hence, it does not help to bring about global warming and it has the smallest carbon footprint.

  1. Reliability

Unlike conventional HVAC systems that are susceptible to environmental factors such as wind, rain and snow, a Geothermal system is an exception; the system functions reliably for a long period.

  1. Energy Saving

In comparison with conventional cooling and heating systems, a geothermal HVAC system saves you about 20-50% on cooling cost and 30-60% on heating cost. Their electrical power consumption is lower compared to other conventional systems.

  1. Noiseless

Unlike other HVAC systems, that has noisy outdoor fan or compressor, geothermal systems are noiseless outside and their indoor unit sounds more like a new refrigerator.

  1. Longevity and Low Maintenance

The service life of a geothermal system can be up to 50 years provided it is rightly designed, built and installed. If you are planning to reside in your home for many years, then a geothermal system will be a sound and reasonable investment. A geothermal system has minimal maintenance problems because they have fewer moving part than other systems.



  1. A major drawback is its initial cost which is usually within the range 10,000-20,000$.
  2. Most suitable for new buildings as retrofitting would involve excavation on a large scale
  3. It is a fairly new system and only a few installers are available. This might lead to maintenance difficulties.
  4. Although durable, fixing underground piping networks could incur serious financial implications.
  5. The installation of a geothermal HVAC system disrupts landscape.
  6. If you are planning to completely stay off the grid, setting up a Geothermal system might cost you some more bucks because they require electricity to function.


Could Geothermal HVAC systems provide the adequate cooling and heating that you desire? Having read through the pros and cons, I am sure by now you know if it’s best for you. Although not perfect, its many benefits make it a worthwhile investment. In case you are in doubt, contact a certified HVAC Technician today for advice.

Don’t Leave your HVAC system to quacks

With the advent of self-learning guides and crash courses. Knowledge and “qualifications” have become cheap and easy to come by. While this is a good thing as it has increased access to education, there’s an often unnoticed downside. Since most of this virtual learning is not as strictly supervised as conventional degrees, there are a lot of half-baked “professionals” out there who will claim the ability to maintain and repair HVAC systems but do not actually have as much knowledge as claimed.
In this post, we will be considering reasons why it’s safer for you to consult professional, qualified and experienced HVAC maintenance companies and personnel rather than the random repair guy whose services may be cheaper but in the long run, will cause more damage.
A brand to protect: The bigger and more established outfits have a name to protect. This reflects in the way they approach projects. They do not want to risk losing the integrity they have gained over the years. This same mentality can be found in the personnel who actually come to carry out the repairs. They understand that they’re wearing a uniform and need to project a good image of their employer. On the other hand, the random guy who is only in it for the money doesn’t care a hoot if your system gets damage soon after his repair.
Further Contact: Established companies are easier to contact should any issues arise after the repair or maintenance job, they are often able to offer follow-up services and stay on the job until the issues get resolved and your system is working as it should. Unqualified personnel will, on the other hand, be unwilling to stick with return jobs to an extent because they are not ready to take responsibility for whatever damage they may have caused. Also, with regards to damages, establish firms have the financial capability to handle and correct their damages. This is not so with unlicensed repairers.
Experience: This is an indispensable element in quality service delivery. Large and established HVAC maintenance and repair outfits have handled many situations over the course of their operation and so they’ve most likely dealt with something similar to your situation. They know what to do and are able to fix it in no time. Unlicensed people, on the other hand, have limited experience and have to spend the bulk of the time troubleshooting your system before coming up with solutions. This will definitely be time wasting.
Long-term servicing: Established HVAC maintenance companies have the tendency to work with you on a permanent basis. This means they already know your HVAC system inside out and are familiar with it enough to handle it. On the other hand, most unlicensed repairers are only doing it as a temporary job. The moment they find bigger opportunities, they will either stop their repair business or even move away from the area entirely. It is, therefore, safer to work with the big names and have an assurance of continued service.

When Should You Replace Your Home Air Filter?

This is an important question that every homeowner ought to ask so as to ensure their HVAC unit is in top working condition. Failure to change your home air filters regularly would mean losing the protection that they provide. Changing the home air filter is critical to the proper functioning and performance of the unit as well as your home’s air quality.

So, when should you do it? Well, the answer to this question will depend on various factors. However, it’s important to note that if your air filter looks dirty, that’s enough reason to change it. Waiting until your furnace filters look completely filthy will not only affect your heating and cooling system but also make your home environment unhealthy. Here is some information that can help you determine when to change your home air filter.

What kind of Air Filter Do you Have?

The frequency to which you’re supposed to change your furnace filter will largely depend on the type of filter you have. Understand that there are different types of filters, varying in thickness and form which you can get from ac repair new port richey. Due to the many bills, you’re supposed to pay monthly, you may be tempted to purchase a cheap furnace filter not knowing that you’ll be required to replace it so soon. Cheap filters require replacement more often. That means you’ll end up spending more money in the long run.

Why not buy a quality filter that will last for a longer period. Take note of the recommendations given about the replacement period when purchasing a filter. Some filters are to be replaced every month, while others take about six months.

How Dusty is your Home

The performance of a furnace filter will also depend on the dust in your home. A home that receives a lot of dust would need its air filter to be changed more often. If your home receives moderate dust, you’ll also need to replace your filters more often. However, if your home doesn’t receive any dust, you’ll need to replace your filter as per the manufacturer’s recommendations. That should be every 3, 6, or 12 months depending on the thickness of your furnace filter.

Do you Keep Doors and Windows Open?

As mentioned, dust affects the performance of furnace filters. It, therefore, follows that if you always open your windows and doors, you may need to replace your filters more often. A one and two-inch furnace filter may need to be replaced each month in this case while a four-inch furnace filter may need to be replaced every two months. If your doors and windows remain closed most of the time, you may need to replace them as per the manufacturer’s guidelines.

Who are the Occupants of your Home?

The occupants of your home will determine the frequency to which you should replace your furnace filters. Is there anyone in your home who suffers from allergies? Do you have pets in your home? If there’s a person who suffers from allergies, you’ll have to change your furnace filters more often than recommended by the manufacturer. A dirty filter won’t function properly which means it won’t trap dust particles and other contaminants. If you have dogs and cats in your home, you’ll need to replace your filter more often as well.

According to the United States Department of Energy, changing or rather replacing your furnace filter as recommended helps to reduce the energy consumption of your air conditioner by about five to ten percent. That means changing a dirty furnace filter will help you save money on your utility bills. more info